CBD FTP Uncut – X3 500MG @ 81% Cartridge + EliteHEAT BATTERY (Choose Terpenes) Save $5


The CBD FTP Uncut – X3 500mg @ 81% Cartridge + EliteHEAT Battery allows for a totally convenient and portable hemp-based experience.

Buy Now

SKU: 6333101190260210 Categories: , ,


CBD FTP Uncut – X3 500MG @ 81% Cartridge + EliteHEAT BATTERY Save $5This CBD FTP Uncut – X3 500mg @ 81% Cartridge + EliteHEAT Battery (Save $5 when you buy this way) allows you to enjoy a seriously one-of-a-kind hemp experience in a totally convenient and portable way. Truly an amazing setup, it provides you with the coveted EliteHEAT Battery, plus the CBD FTP Uncut – X3 500mg @ 81% Cartridge. The cartridge contains an uncut, undiluted hemp extract that comes in an enormous variety of terpene strains. Choose the plant properties that you’d like to consume based on your needs. Also, the potency level is uniquely high, allowing for a more concentrated CBD session overall.Welcome to the All-New FTP X3 Cartridge!The X3 is their flagship cartridge, with potency over 80% and blissfulness like you wouldn’t believe. Turns out the CBD molecule is really big and likes to crystallize at concentrations over 60%, and there isn’t a dang thing you can do about it. Any attempts to make a cartridge stronger than their game-changing X2 ended up with wax that would turn into CBD rock candy, get stuck halfway up the cartridge, refuse to flow down into the intake holes, and make us really sad.But fear not! FTP found a way.Enter…the EliteHEAT™This bad boy is the grooviest 510-thread-compatible cartridge battery you’ll ever see. It’s got all the main features of their super-rad FTP Elite battery PLUS an awesome warming chamber. That ensures even the thickest, most crystallized cartridges can flow and provide a consistent vaping experience.Now you CAN use the X3 cartridge with a regular battery. Be warned- the cartridge has to be kept upright at all times or the wax will get stuck. You should probably be ready to bust out a hair dryer to melt the wax down a bit just in case.X3 Cartridge & Battery Instructions:Items Needed: X3 cartridge (full or half gram) EliteHEAT™ battery Preheat chamber (separated from battery) You! One or more of your favorite people (optional)Steps: Step 1: Turn on the battery, if it’s not on already. Click the button 5 times really fast (one-two-three-four-five, within 1 second).Step 2: Ensure the battery is set to the correct voltage setting – we recommend starting with white and going up from there. To cycle voltages, triple-tap the button (one-two-three, within 1 second): White – Blue – Green – Red – reset (White)Step 3: Screw the cartridge onto the battery threads. Make sure the airflow holes are open (this is muy importante).Step 4: Slide the preheat chamber over the cartridge and screw it onto the battery.Step 5: If the wax is solid – looks like tiny rock candy crystals, doesn’t flow at all – DO NOT PANIC; this is what you got the EliteHEAT™ for. Double-tap the button to start a preheat cycle, which lasts for 90 seconds if you let it do its thing. You’ll see the color change on the button as it goes – this is the voltage increasing every 30 seconds to fully heat the cartridge. So cool, right?! If the weather is cold, the A/C is bumping, or you’re in a walk-in refrigerator (we don’t judge) you might actually want a second warming cycle to fully liquefy the X3. This is some gnarly-thick wax, it’s just the nature of the beast. Still beats sitting there with a hair dryer.Step 6: It’s vaping time! Hold down the button while inhaling through the cartridge tip. If this is your first X3, start with SMALL PUFFS. Again…gnarly-thick wax. Treat it with respect.Step 7 (optional): Once you’re done, turn off the battery by repeating step 1.Are You Ready for SOME POTENCY?Get yours today from CBD For The People, online at Pure CBD Vapors.


There are no reviews yet.

Be the first to review “CBD FTP Uncut – X3 500MG @ 81% Cartridge + EliteHEAT BATTERY (Choose Terpenes) Save $5”

Your email address will not be published. Required fields are marked *